Page 1 of 37Free preview · 1–5

About this document

This standard establishes requirements for identifying and categorizing Bulk Electric System (BES) Cyber Systems according to their potential impact on reliable BES operation. It defines applicability and exemptions, high-, medium-, and low-impact rating criteria, identification and approval requirements, compliance monitoring, evidence retention, and violation severity levels. Responsible Entities must review and obtain approval of their identifications at least every 15 calendar months. Supporting material provides technical guidance, categorization rationale, version history, and an interpretation clarifying that shared BES Cyber Systems under Attachment 1, Criterion 2.1 are evaluated individually rather than collectively.

Free preview text

The first 5 pages, shown as text so search engines and readers can find this document.

Page 1

CIP-002-5.1a — Cyber Security — BES Cyber System Categorization Page 1 of 37 A. Introduction 1. Title: Cyber Security — BES Cyber System Categorization 2. Number: CIP-002-5.1a 3. Purpose: To identify and categorize BES Cyber Systems and their associated BES Cyber Assets for the application of cyber security requirements commensurate with the adverse impact that loss, compromise, or misuse of those BES Cyber Systems could have on the reliable operation of the BES. Identification and categorization of BES Cyber Systems support appropriate protection against compromises that could lead to misoperation or instability in the BES. 4. Applicability: 4.1. Functional Entities: For the purpose of the requirements contained herein, the following list of functional entities will be collectively referred to as “Responsible Entities.” For requirements in this standard where a specific functional entity or subset of functional entities are the applicable entity or entities, the functional entity or entities are specified explicitly. 4.1.1. Balancing Authority 4.1.2. Distribution Provider that owns one or more of the following Facilities, systems, and equipment for the protection or restoration of the BES: 4.1.2.1. Each underfrequency load shedding (UFLS) or undervoltage load shedding (UVLS) system that: 4.1.2.1.1. is part of a Load shedding program that is subject to one or more requirements in a NERC or Regional Reliability Standard; and 4.1.2.1.2. performs automatic Load shedding under a common control system owned by the Responsible Entity, without human operator initiation, of 300 MW or more. 4.1.2.2. Each Special Protection System or Remedial Action Scheme where the Special Protection System or Remedial Action Scheme is subject to one or more requirements in a NERC or Regional Reliability Standard. 4.1.2.3. Each Protection System (excluding UFLS and UVLS) that applies to Transmission where the Protection System is subject to one or more requirements in a NERC or Regional Reliability Standard. 4.1.2.4. Each Cranking Path and group of Elements meeting the initial switching requirements from a Blackstart Resource up to and including the first interconnection point of the starting station service of the next generation unit(s) to be started. 4.1.3. Generator Operator 4.1.4. Generator Owner

Page 2

CIP-002-5.1a — Cyber Security — BES Cyber System Categorization Page 2 of 37 4.1.5. Interchange Coordinator or Interchange Authority 4.1.6. Reliability Coordinator 4.1.7. Transmission Operator 4.1.8. Transmission Owner 4.2. Facilities: For the purpose of the requirements contained herein, the following Facilities, systems, and equipment owned by each Responsible Entity in 4.1 above are those to which these requirements are applicable. For requirements in this standard where a specific type of Facilities, system, or equipment or subset of Facilities, systems, and equipment are applicable, these are specified explicitly. 4.2.1. Distribution Provider: One or more of the following Facilities, systems and equipment owned by the Distribution Provider for the protection or restoration of the BES: 4.2.1.1. Each UFLS or UVLS System that: 4.2.1.1.1. is part of a Load shedding program that is subject to one or more requirements in a NERC or Regional Reliability Standard; and 4.2.1.1.2. performs automatic Load shedding under a common control system owned by the Responsible Entity, without human operator initiation, of 300 MW or more. 4.2.1.2. Each Special Protection System or Remedial Action Scheme where the Special Protection System or Remedial Action Scheme is subject to one or more requirements in a NERC or Regional Reliability Standard. 4.2.1.3. Each Protection System (excluding UFLS and UVLS) that applies to Transmission where the Protection System is subject to one or more requirements in a NERC or Regional Reliability Standard. 4.2.1.4. Each Cranking Path and group of Elements meeting the initial switching requirements from a Blackstart Resource up to and including the first interconnection point of the starting station service of the next generation unit(s) to be started. 4.2.2. Responsible Entities listed in 4.1 other than Distribution Providers: All BES Facilities. 4.2.3. Exemptions: The following are exempt from Standard CIP-002-5.1a: 4.2.3.1. Cyber Assets at Facilities regulated by the Canadian Nuclear Safety Commission. 4.2.3.2. Cyber Assets associated with communication networks and data communication links between discrete Electronic Security Perimeters.

Page 3

CIP-002-5.1a — Cyber Security — BES Cyber System Categorization Page 3 of 37 4.2.3.3. The systems, structures, and components that are regulated by the Nuclear Regulatory Commission under a cyber security plan pursuant to 10 C.F.R. Section 73.54. 4.2.3.4. For Distribution Providers, the systems and equipment that are not included in section 4.2.1 above. 5. Effective Dates: 1. 24 Months Minimum – CIP-002-5.1a shall become effective on the later of July 1, 2015, or the first calendar day of the ninth calendar quarter after the effective date of the order providing applicable regulatory approval. 2. In those jurisdictions where no regulatory approval is required CIP-002-5.1a shall become effective on the first day of the ninth calendar quarter following Board of Trustees’ approval, or as otherwise made effective pursuant to the laws applicable to such ERO governmental authorities. 6. Background: This standard provides “bright-line” criteria for applicable Responsible Entities to categorize their BES Cyber Systems based on the impact of their associated Facilities, systems, and equipment, which, if destroyed, degraded, misused, or otherwise rendered unavailable, would affect the reliable operation of the Bulk Electric System. Several concepts provide the basis for the approach to the standard. Throughout the standards, unless otherwise stated, bulleted items in the requirements are items that are linked with an “or,” and numbered items are items that are linked with an “and.” Many references in the Applicability section and the criteria in Attachment 1 of CIP- 002 use a threshold of 300 MW for UFLS and UVLS. This particular threshold of 300 MW for UVLS and UFLS was provided in Version 1 of the CIP Cyber Security Standards. The threshold remains at 300 MW since it is specifically addressing UVLS and UFLS, which are last ditch efforts to save the Bulk Electric System. A review of UFLS tolerances defined within regional reliability standards for UFLS program requirements to date indicates that the historical value of 300 MW represents an adequate and reasonable threshold value for allowable UFLS operational tolerances. BES Cyber Systems One of the fundamental differences between Versions 4 and 5 of the CIP Cyber Security Standards is the shift from identifying Critical Cyber Assets to identifying BES Cyber Systems. This change results from the drafting team’s review of the NIST Risk Management Framework and the use of an analogous term “information system” as the target for categorizing and applying security controls.

Page 4

CIP-002-5.1a — Cyber Security — BES Cyber System Categorization Page 4 of 37CCACCA CCACCA Non-Critical Cyber Asset Within an ESP Non-Critical Cyber Asset Within an ESP BES Cyber System Associated Protected Cyber Assets Associated Electronic and Physical Access Control and Monitoring Systems Version 4 Cyber Assets Version 5 Cyber Assets CIP-005-4 R1.5 and CIP-006-4 R2 In transitioning from Version 4 to Version 5, a BES Cyber System can be viewed simply as a grouping of Critical Cyber Assets (as that term is used in Version 4). The CIP Cyber Security Standards use the “BES Cyber System” term primarily to provide a higher level for referencing the object of a requirement. For example, it becomes possible to apply requirements dealing with recovery and malware protection to a grouping rather than individual Cyber Assets, and it becomes clearer in the requirement that malware protection applies to the system as a whole and may not be necessary for every individual device to comply. Another reason for using the term “BES Cyber System” is to provide a convenient level at which a Responsible Entity can organize their documented implementation of the requirements and compliance evidence. Responsible Entities can use the well- developed concept of a security plan for each BES Cyber System to document the programs, processes, and plans in place to comply with security requirements. It is left up to the Responsible Entity to determine the level of granularity at which to identify a BES Cyber System within the qualifications in the definition of BES Cyber System. For example, the Responsible Entity might choose to view an entire plant control system as a single BES Cyber System, or it might choose to view certain components of the plant control system as distinct BES Cyber Systems. The Responsible Entity should take into consideration the operational environment and

Page 5

CIP-002-5.1a — Cyber Security — BES Cyber System Categorization Page 5 of 37 scope of management when defining the BES Cyber System boundary in order to maximize efficiency in secure operations. Defining the boundary too tightly may result in redundant paperwork and authorizations, while defining the boundary too broadly could make the secure operation of the BES Cyber System difficult to monitor and assess. Reliable Operation of the BES The scope of the CIP Cyber Security Standards is restricted to BES Cyber Systems that would impact the reliable operation of the BES. In order to identify BES Cyber Systems, Responsible Entities determine whether the BES Cyber Systems perform or support any BES reliability function according to those reliability tasks identified for their reliability function and the corresponding functional entity’s responsibilities as defined in its relationships with other functional entities in the NERC Functional Model. This ensures that the initial scope for consideration includes only those BES Cyber Systems and their associated BES Cyber Assets that perform or support the reliable operation of the BES. The definition of BES Cyber Asset provides the basis for this scoping. Real-time Operations One characteristic of the BES Cyber Asset is a real-time scoping characteristic. The time horizon that is significant for BES Cyber Systems and BES Cyber Assets subject to the application of these Version 5 CIP Cyber Security Standards is defined as that which is material to real-time operations for the reliable operation of the BES. To provide a better defined time horizon than “Real-time,” BES Cyber Assets are those Cyber Assets that, if rendered unavailable, degraded, or misused, would adversely impact the reliable operation of the BES within 15 minutes of the activation or exercise of the compromise. This time window must not include in its consideration the activation of redundant BES Cyber Assets or BES Cyber Systems: from the cyber security standpoint, redundancy does not mitigate cyber security vulnerabilities. Categorization Criteria The criteria defined in Attachment 1 are used to categorize BES Cyber Systems into impact categories. Requirement 1 only requires the discrete identification of BES Cyber Systems for those in the high impact and medium impact categories. All BES Cyber Systems for Facilities not included in Attachment 1 – Impact Rating Criteria, Criteria 1.1 to 1.4 and Criteria 2.1 to 2.11 default to be low impact. This general process of categorization of BES Cyber Systems based on impact on the reliable operation of the BES is consistent with risk management approaches for the purpose of application of cyber security requirements in the remainder of the Version 5 CIP Cyber Security Standards. Electronic Access Control or Monitoring Systems, Physical Access Control Systems, and Protected Cyber Assets that are associated with BES Cyber Systems

Tags

Doxxly editorial guide

CIP-002-5.1a - Cyber Security - BES Cyber System Categorization: summary, contents and background

This guide helps you understand the scope of CIP-002-5.1a - Cyber Security - BES Cyber System Categorization before or alongside reading the original document. It is based on the catalogue record, credited creator, source, classification and topics shown on this page. It does not replace the original work and does not invent claims about passages that Doxxly cannot verify.

Summary and overview

CIP-002-5.1a - Cyber Security - BES Cyber System Categorization is a 37-page documentcredited to Mira I. Quinlan. This standard establishes requirements for identifying and categorizing Bulk Electric System (BES) Cyber Systems according to their potential impact on reliable BES operation. It defines applicability and exemptions, high-, medium-, and low-impact rating criteria, identification and approval requirements, compliance monitoring, evidence retention, and violation severity levels. Responsible Entities must review and obtain approval of their identifications at least every 15 calendar months. Supporting material provides technical guidance, categorization rationale, version history, and an interpretation clarifying that shared BES Cyber Systems under Attachment 1, Criterion 2.1 are evaluated individually rather than collectively. It appears in the Technology & Security collection, which groups it with other material that readers may use for comparison and further study.

The item can be approached in several ways. A reader looking for a quick orientation can begin with the free five-page preview, inspect the page structure and use the metadata to judge relevance. Someone undertaking deeper research can work through the complete file, search its indexed text, record useful page references and compare its treatment of CIP-002-5.1a, Cyber Security, Bulk Electric System, BES Cyber Systems, Impact Categorization, Reliability Standards, Compliance, Electric Power with the related resources linked below.

Rather than reducing the work to a single claim, this page treats it as a source that should be read in context. The title, creator, publication source, licence and format all help explain what kind of evidence it may offer. Readers should distinguish the original author's statements from Doxxly's catalogue description, and should cite the original edition when using the material in academic, professional or published work.

Key topics and reader takeaways

The catalogue connects this document with CIP-002-5.1a, Cyber Security, Bulk Electric System, BES Cyber Systems, Impact Categorization, Reliability Standards, Compliance, Electric Power. These terms offer practical entry points rather than a substitute for close reading. Start by identifying the definitions, examples, arguments, tables or visual explanations attached to each topic. Then note where the creator draws connections, makes distinctions or moves from background material to a conclusion, recommendation, calculation or narrative development.

A useful reading method is to separate description from interpretation. First record what the item actually presents: names, headings, figures, formulas, quotations or stated propositions. Next consider why those details matter within the whole work. Finally compare them with another source from the same subject area. This process helps turn a long digital file into evidence that can be evaluated rather than merely skimmed.

Table of contents and reading guide

The following is an editorial content guide based on the verified catalogue topics. It is not represented as the original author's formal table of contents. Use it to organise notes while moving through the 37 pages in the player.

  1. Part 1

    CIP-002-5.1a

    Use this section of the reading guide to identify how CIP-002-5.1a appears in CIP-002-5.1a - Cyber Security - BES Cyber System Categorization, note important terms, and connect the subject to the wider purpose of the work.

  2. Part 2

    Cyber Security

    Use this section of the reading guide to identify how Cyber Security appears in CIP-002-5.1a - Cyber Security - BES Cyber System Categorization, note important terms, and connect the subject to the wider purpose of the work.

  3. Part 3

    Bulk Electric System

    Use this section of the reading guide to identify how Bulk Electric System appears in CIP-002-5.1a - Cyber Security - BES Cyber System Categorization, note important terms, and connect the subject to the wider purpose of the work.

  4. Part 4

    BES Cyber Systems

    Use this section of the reading guide to identify how BES Cyber Systems appears in CIP-002-5.1a - Cyber Security - BES Cyber System Categorization, note important terms, and connect the subject to the wider purpose of the work.

  5. Part 5

    Impact Categorization

    Use this section of the reading guide to identify how Impact Categorization appears in CIP-002-5.1a - Cyber Security - BES Cyber System Categorization, note important terms, and connect the subject to the wider purpose of the work.

  6. Part 6

    Reliability Standards

    Use this section of the reading guide to identify how Reliability Standards appears in CIP-002-5.1a - Cyber Security - BES Cyber System Categorization, note important terms, and connect the subject to the wider purpose of the work.

  7. Part 7

    Compliance

    Use this section of the reading guide to identify how Compliance appears in CIP-002-5.1a - Cyber Security - BES Cyber System Categorization, note important terms, and connect the subject to the wider purpose of the work.

  8. Part 8

    Electric Power

    Use this section of the reading guide to identify how Electric Power appears in CIP-002-5.1a - Cyber Security - BES Cyber System Categorization, note important terms, and connect the subject to the wider purpose of the work.

When a heading in the original differs from this guide, follow the original heading in your citation. Page numbers can also vary between editions. Doxxly's direct page field is useful for navigation, but formal references should include the title, creator, source and edition details available in the file itself.

About Mira I. Quinlan

Doxxly credits Mira I. Quinlan as the author or creator of CIP-002-5.1a - Cyber Security - BES Cyber System Categorization. This page does not add an unverified biography, job title or institutional affiliation. The attribution is preserved so readers can distinguish the creator from the hosting library and follow the original record when an external author link is available.

Author context matters because a work reflects a particular purpose, audience and point of view. Before relying on the material, consider what the creator set out to explain, when the source was produced and whether later research or revised guidance should also be consulted. For literature and philosophy, compare translations and editions; for technical material, check whether a newer version has superseded the one shown here.

About the source organisation

The recorded source for this item is nerc.com. Doxxly provides access and discovery tools but does not claim to be the original publisher unless explicitly stated. Source links, creator attribution and the recorded Publicly available file collected for editorial review licence are displayed to help readers assess provenance and permitted use.

Provenance is especially important for reports, standards, presentations and working spreadsheets. Check the original source for amendments, supporting files and current policy. A trustworthy research workflow keeps the source URL with any notes or downloaded copy, verifies important figures against the original, and avoids treating an archived document as automatically current.

Visit nerc.com

How to read and use this document

Begin with the title and opening pages, then use the guide above to decide whether to read sequentially or move to a particular topic. The Doxxly player provides previous and next navigation, a direct page field, zoom steps, fit-to-width and fit-to-page modes, rotation and fullscreen. These controls are useful when a page contains small type, a wide table, an image, a scanned layout or a dense sequence of notes.

The first five pages are open to every visitor. A plan unlocks the complete item and full-document search. Search is best used for distinctive names, technical terms or short phrases; broad words can produce too many possible contexts. When you find a useful passage, read the surrounding pages so that a sentence, chart or formula is not separated from its explanation.

If downloading is enabled, members can obtain the original PDF file. Keep the original format when formulas, slide sequencing, pagination or layout carries meaning. Respect the Publicly available file collected for editorial review terms displayed on this page, and use the rights-report link if you believe the attribution or availability needs review.

Research questions to consider

As you read CIP-002-5.1a - Cyber Security - BES Cyber System Categorization, ask which audience the creator addresses, what problem or idea organises the work, what evidence is presented, and which assumptions remain unstated. Note whether important terms are defined consistently and whether examples represent a broader pattern or a narrow case. For quantitative material, record units, time periods, formulas and data sources. For interpretive material, separate the creator's language from your own summary.

A second set of questions concerns relevance today. Which parts remain durable, which depend on their historical or institutional setting, and what would need confirmation from a newer source? Following the tags and the Technology & Security collection can reveal useful comparisons. Agreement between sources can strengthen confidence, while disagreement can point to changing definitions, methods, evidence or priorities.

Finally, decide what you need from the item: background knowledge, a quotation, a worked example, a model, a visual explanation or a starting bibliography. That purpose should guide the depth of reading and the notes you keep. Doxxly helps locate and navigate the source; careful interpretation remains the reader's responsibility.

Explore more Technology & Security resources

Frequently asked questions about CIP-002-5.1a - Cyber Security - BES Cyber System Categorization

Practical answers about reading, downloading and understanding this document on Doxxly.

More in Technology & Security