Page 1 of 11Free preview · 1–5

About this document

This research article in Jurnal E-Komtek, Vol. 10, No. 1 (2026), pp. 185 - 195, investigates active contour segmentation of liver cancer CT images from a public Kaggle dataset. The MATLAB implementation uses image enhancement techniques including CLAHE and contrast stretching, with segmentation evaluated against manual dataset masks using accuracy, sensitivity, and specificity. The results table reports average accuracy of 97.1657%, sensitivity of 75.6970%, and specificity of 98.8542%. The authors recommend further evaluation using real-world clinical data.

Free preview text

The first 5 pages, shown as text so search engines and readers can find this document.

Page 1

Jurnal E-Komtek Vol. 10, No. 1. (2026) pp. 185-195 https://jurnal.politeknik-kebumen.ac.id/index.php/E-KOMTEK p-ISSN : 2580-3719 e-ISSN : 2622-3066 CT-Scan Image Segmentation of Liver Cancer Using the Active Contour Method Nurazizah1 , Dwina Kuswardani2, Herman Bedi Agtriadi3 1-3Department of Informatics Engineering, Institut Teknologi PLN, Indonesia, 11750 nurazizah2031097@itpln.ac.id https://doi.org/10.37339/e-komtek.v10i1.3273 Published by Politeknik Piksi Ganesha Indonesia Artikel Info Submitted: 24-06-2026 Revised: 25-06-2026 Accepted: 30-06-2026 Online first : 30-06-2026 Abstract Liver cancer is one of the most common types of cancer both in Indonesia and throughout the world. The increase in liver cancer cases is thought to be related to the increase in hepatitis B and C virus infections. According to statistical data from Globocan, in 2022 there will be 866,000 cases of liver cancer recorded worldwide, with 758,000 deaths due to this disease. To overcome this challenge, image processing plays an important role in improving image quality and performing segmentation to separate objects based on certain characteristics. In this research, the Contrast Limited Adaptive Histogram Equalization (CLAHE) and Contrast Stretching methods are used to improve image quality, while the Active Contour method is applied for image segmentation. Validation of segmentation results was carried out using Receiver Operating Characteristic (ROC) calculations. Testing was conducted on 21 CT-scan images of liver cancer, yielding an accuracy of 97.16%, a sensitivity of 75.69%, and a specificity of 98.85%. This research was conducted using the MATLAB application (R2015a). These findings demonstrate the effectiveness of the methods used in supporting the diagnosis and treatment of liver cancer. Keywords: Active Contour, Liver Cancer, Matlab, ROC Abstrak Kanker hati merupakan salah satu jenis kanker yang paling umum baik di Indonesia maupun di seluruh dunia. Peningkatan kasus kanker hati diduga berkaitan dengan meningkatnya infeksi virus hepatitis B dan C. Menurut data statistik dari Globocan, pada tahun 2022 akan tercatat 866.000 kasus kanker hati di seluruh dunia, dengan 758.000 kematian akibat penyakit ini. Untuk mengatasi tantangan ini, pemrosesan citra memainkan peran penting dalam meningkatkan kualitas citra dan melakukan segmentasi untuk memisahkan objek berdasarkan karakteristik tertentu. Dalam penelitian ini, metode Contrast Limited Adaptive Histogram Equalization (CLAHE) dan Contrast Stretching digunakan untuk meningkatkan kualitas citra, sedangkan metode Active Contour diterapkan untuk segmentasi citra. Validasi hasil segmentasi dilakukan dengan perhitungan Receiver Operating Characteristic (ROC). Pengujian dilakukan pada 21 gambar CT scan kanker hati, yang menghasilkan akurasi sebesar 97,16%, sensitivitas sebesar 75,69%, dan spesifisitas sebesar 98,85%. Penelitian ini dilakukan menggunakan aplikasi MATLAB (R2015a). Temuan ini menunjukkan keefektifan metode yang digunakan dalam mendukung diagnosis dan pengobatan kanker hati. Kata-kata kunci: Kontur Aktif, Kanker Hati, MATLAB, ROC This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Page 2

© Nurazizah1, Dwina Kuswardani2, Herman Bedi Agtriadi3 186 1. Introduction Liver cancer is one of the most common cancers in Indonesia and globally. The rise in hepatitis B and C transmission is thought to be linked to this increase. According to the Global Burden of Cancer (Global Burden of Cancer) report, in 2022, there were 866,000 cases of liver cancer worldwide, and 758,000 deaths from the disease [1]. Liver cancer detection is still carried out through imaging media such as CT scans, on the liver, which produce liver image data. However, CT scans of the liver also include other organs such as the kidneys, gallbladder, and pancreas, which can hinder the process of detecting liver disease [2]. Segmentation is the process of separating or dividing one object from another in an image. With segmentation, users can identify good and bad parts of an object in an image. This is the initial step in image analysis before proceeding to the image recognition stage from a specific input. As explained previously, the purpose of image segmentation is to divide an image into several regions based on similarities in texture, color, shape, and various other attributes. Receiver Operating Characteristic (ROC) is a curve used to evaluate the performance of a classification model by displaying the relationship between the True Positive Rate (TPR) and False Positive Rate (FPR) at various classification thresholds. True Positive Rate, also known as sensitivity or recall, is the proportion of positive examples that are actually detected by the model [3]. Liver segmentation in CT-Scan images is a problem due to variations in liver size and intensity levels similar to neighboring organs such as the heart and kidneys. In addition, unclear anatomical boundaries, low contrast in medical images, the effects of patient motion that cause partial volume, spatial smoothing, and reconstruction artifacts are also factors that make liver segmentation difficult and complex. 2. Method This study began with a requirements analysis phase to identify problems and determine system requirements for the diagnosis of liver cancer using CT-scan images. The next phase involved image preprocessing using the Inverse and Contrast-Limited Adaptive Histogram Equalization (CLAHE) methods to improve image quality and clarify the characteristics of the objects to be analyzed. After preprocessing, image segmentation was performed using the Active Contour method with an Edge model to more accurately separate the liver area from the surrounding

Page 3

© Nurazizah1, Dwina Kuswardani2, Herman Bedi Agtriadi3 187 tissue. The segmentation results were then evaluated using the Receiver Operating Characteristic (ROC) curve to measure the performance and accuracy of the segmentation in supporting the diagnostic process [3]. Figure 1. Research Design. Research Stages with the Active Contour Method a. Collecting Image Data In this study, the authors used Computed Tomography Scan (CT-Scan) Liver Tumor image data derived from a public dataset published on the Kaggle website in 2020 https://www.kaggle.com/datasets/andrewmvd/liver-tumor-segmentation/data [4]. b. Digital Image An image can be understood mathematically as a two-dimensional representation. Digital image processing refers to techniques used to enhance image quality so that it becomes easier for humans or computer systems to interpret, often using photographic data as input. The primary purpose of this process is to make images clearer and more meaningful for analysis. As a branch of artificial intelligence, image processing utilizes digital representations of objects to address various problems. These techniques often involve geometric or mathematical operations, such as analyzing pixel values to quantify objects within an image. Each element in an image

Page 4

© Nurazizah1, Dwina Kuswardani2, Herman Bedi Agtriadi3 188 carries measurable values that represent different attributes of an object and how they relate to one another. Objects within an image can be differentiated based on characteristics like color, texture, and shape. In a two-dimensional space, an image can also be described as a continuous function that represents variations in light intensity [5] [6]. Figure 2. Digital Images and Their Composition of Pixels c. Inverse Process In CT scans, the inverse process can be used to clarify the difference between healthy and unhealthy tissue, thus aiding in medical diagnosis and analysis. This image inversion process functions to reverse the image values by reflecting pixel values around the middle of the intensity range. The result of this process will form a negative image, this process is done by subtracting the pixel values in the image from 255. The equation for the inverse process is as follows [7]. Figure 3. Liver Cancer CT Scan Image Data 𝑔(𝑥, 𝑦) = 255 − 𝑓(𝑥, 𝑦) (1) Keterangan ; 𝑔(𝑥, 𝑦) = Citra Negatif 𝑓(𝑥, 𝑦) = Citra Asli

Page 5

© Nurazizah1, Dwina Kuswardani2, Herman Bedi Agtriadi3 189 d. Contrast Limited Adaptive Histogram Equalization (CLAHE) CLAHE (Contrast Limited Adaptive Histogram Equalization) is used to operate on small areas in the image called blocks. After the Inverse and grayscale processes are completed, the CLAHE (adapthisteq) process is performed on each block to increase its contrast [8]. After obtaining the inverse results, the next step is to perform histogram equalization with the following equation. 𝛽 = 𝑀 𝑁 (1 + 𝛼 100 (𝑆𝑚𝑎𝑥 − 1)) (2) e. Initialization Process After deciding the number of iterations, the next step is to set up the initialization stage. This stage defines the region of interest in the image for the Active Contour process. The initialization is carried out using a polygon approach, where a polygon is a geometric shape formed by more than two points. In this study, polygons are utilized to specify coordinate regions within the image. Two initialization scenarios are applied: polygons with three points and polygons with four points, both positioned either inside or outside the object [5]. (a) (b) Figure 4. (a) Example of 3-Point Playgon, (b) Example of 4-Point Playgon f. Active Contour Process Liver cancer segmentation in CT scan images using the Active Contour method. In digital images, there are internal and external energies that affect the Active Contour curve. Active Contour will minimize this energy to find the contrast intensity inside and outside the contour. The Active Contour method performs segmentation through an initialization process, where these initialization points will expand and contract to find the object's edge. The number of iterations input also determines how many iterations are required for the initialization points to find the object's edge. The parameters used in this study are 'Chan-Vese' and 'ContractionBias'[9]. g. Receiver Operating Characteristic (ROC) Testing Method In ROC there are four possibilities that will occur, namely:

Tags

Doxxly editorial guide

CT-Scan Image Segmentation of Liver Cancer Using the Active Contour Method: summary, contents and background

This guide helps you understand the scope of CT-Scan Image Segmentation of Liver Cancer Using the Active Contour Method before or alongside reading the original document. It is based on the catalogue record, credited creator, source, classification and topics shown on this page. It does not replace the original work and does not invent claims about passages that Doxxly cannot verify.

Summary and overview

CT-Scan Image Segmentation of Liver Cancer Using the Active Contour Method is a 11-page documentcredited to Rhea B. Penrose. This research article in Jurnal E-Komtek, Vol. 10, No. 1 (2026), pp. 185 - 195, investigates active contour segmentation of liver cancer CT images from a public Kaggle dataset. The MATLAB implementation uses image enhancement techniques including CLAHE and contrast stretching, with segmentation evaluated against manual dataset masks using accuracy, sensitivity, and specificity. The results table reports average accuracy of 97.1657%, sensitivity of 75.6970%, and specificity of 98.8542%. The authors recommend further evaluation using real-world clinical data. It appears in the Science & Engineering collection, which groups it with other material that readers may use for comparison and further study.

The item can be approached in several ways. A reader looking for a quick orientation can begin with the free five-page preview, inspect the page structure and use the metadata to judge relevance. Someone undertaking deeper research can work through the complete file, search its indexed text, record useful page references and compare its treatment of Liver cancer, CT imaging, Medical image segmentation, Active contour, CLAHE, Contrast stretching, MATLAB, ROC evaluation with the related resources linked below.

Rather than reducing the work to a single claim, this page treats it as a source that should be read in context. The title, creator, publication source, licence and format all help explain what kind of evidence it may offer. Readers should distinguish the original author's statements from Doxxly's catalogue description, and should cite the original edition when using the material in academic, professional or published work.

Key topics and reader takeaways

The catalogue connects this document with Liver cancer, CT imaging, Medical image segmentation, Active contour, CLAHE, Contrast stretching, MATLAB, ROC evaluation. These terms offer practical entry points rather than a substitute for close reading. Start by identifying the definitions, examples, arguments, tables or visual explanations attached to each topic. Then note where the creator draws connections, makes distinctions or moves from background material to a conclusion, recommendation, calculation or narrative development.

A useful reading method is to separate description from interpretation. First record what the item actually presents: names, headings, figures, formulas, quotations or stated propositions. Next consider why those details matter within the whole work. Finally compare them with another source from the same subject area. This process helps turn a long digital file into evidence that can be evaluated rather than merely skimmed.

Table of contents and reading guide

The following is an editorial content guide based on the verified catalogue topics. It is not represented as the original author's formal table of contents. Use it to organise notes while moving through the 11 pages in the player.

  1. Part 1

    Liver cancer

    Use this section of the reading guide to identify how Liver cancer appears in CT-Scan Image Segmentation of Liver Cancer Using the Active Contour Method, note important terms, and connect the subject to the wider purpose of the work.

  2. Part 2

    CT imaging

    Use this section of the reading guide to identify how CT imaging appears in CT-Scan Image Segmentation of Liver Cancer Using the Active Contour Method, note important terms, and connect the subject to the wider purpose of the work.

  3. Part 3

    Medical image segmentation

    Use this section of the reading guide to identify how Medical image segmentation appears in CT-Scan Image Segmentation of Liver Cancer Using the Active Contour Method, note important terms, and connect the subject to the wider purpose of the work.

  4. Part 4

    Active contour

    Use this section of the reading guide to identify how Active contour appears in CT-Scan Image Segmentation of Liver Cancer Using the Active Contour Method, note important terms, and connect the subject to the wider purpose of the work.

  5. Part 5

    CLAHE

    Use this section of the reading guide to identify how CLAHE appears in CT-Scan Image Segmentation of Liver Cancer Using the Active Contour Method, note important terms, and connect the subject to the wider purpose of the work.

  6. Part 6

    Contrast stretching

    Use this section of the reading guide to identify how Contrast stretching appears in CT-Scan Image Segmentation of Liver Cancer Using the Active Contour Method, note important terms, and connect the subject to the wider purpose of the work.

  7. Part 7

    MATLAB

    Use this section of the reading guide to identify how MATLAB appears in CT-Scan Image Segmentation of Liver Cancer Using the Active Contour Method, note important terms, and connect the subject to the wider purpose of the work.

  8. Part 8

    ROC evaluation

    Use this section of the reading guide to identify how ROC evaluation appears in CT-Scan Image Segmentation of Liver Cancer Using the Active Contour Method, note important terms, and connect the subject to the wider purpose of the work.

When a heading in the original differs from this guide, follow the original heading in your citation. Page numbers can also vary between editions. Doxxly's direct page field is useful for navigation, but formal references should include the title, creator, source and edition details available in the file itself.

About Rhea B. Penrose

Doxxly credits Rhea B. Penrose as the author or creator of CT-Scan Image Segmentation of Liver Cancer Using the Active Contour Method. This page does not add an unverified biography, job title or institutional affiliation. The attribution is preserved so readers can distinguish the creator from the hosting library and follow the original record when an external author link is available.

Author context matters because a work reflects a particular purpose, audience and point of view. Before relying on the material, consider what the creator set out to explain, when the source was produced and whether later research or revised guidance should also be consulted. For literature and philosophy, compare translations and editions; for technical material, check whether a newer version has superseded the one shown here.

About the source organisation

The recorded source for this item is jurnal.politeknik-kebumen.ac.id. Doxxly provides access and discovery tools but does not claim to be the original publisher unless explicitly stated. Source links, creator attribution and the recorded Publicly available file collected for editorial review licence are displayed to help readers assess provenance and permitted use.

Provenance is especially important for reports, standards, presentations and working spreadsheets. Check the original source for amendments, supporting files and current policy. A trustworthy research workflow keeps the source URL with any notes or downloaded copy, verifies important figures against the original, and avoids treating an archived document as automatically current.

Visit jurnal.politeknik-kebumen.ac.id

How to read and use this document

Begin with the title and opening pages, then use the guide above to decide whether to read sequentially or move to a particular topic. The Doxxly player provides previous and next navigation, a direct page field, zoom steps, fit-to-width and fit-to-page modes, rotation and fullscreen. These controls are useful when a page contains small type, a wide table, an image, a scanned layout or a dense sequence of notes.

The first five pages are open to every visitor. A plan unlocks the complete item and full-document search. Search is best used for distinctive names, technical terms or short phrases; broad words can produce too many possible contexts. When you find a useful passage, read the surrounding pages so that a sentence, chart or formula is not separated from its explanation.

If downloading is enabled, members can obtain the original PDF file. Keep the original format when formulas, slide sequencing, pagination or layout carries meaning. Respect the Publicly available file collected for editorial review terms displayed on this page, and use the rights-report link if you believe the attribution or availability needs review.

Research questions to consider

As you read CT-Scan Image Segmentation of Liver Cancer Using the Active Contour Method, ask which audience the creator addresses, what problem or idea organises the work, what evidence is presented, and which assumptions remain unstated. Note whether important terms are defined consistently and whether examples represent a broader pattern or a narrow case. For quantitative material, record units, time periods, formulas and data sources. For interpretive material, separate the creator's language from your own summary.

A second set of questions concerns relevance today. Which parts remain durable, which depend on their historical or institutional setting, and what would need confirmation from a newer source? Following the tags and the Science & Engineering collection can reveal useful comparisons. Agreement between sources can strengthen confidence, while disagreement can point to changing definitions, methods, evidence or priorities.

Finally, decide what you need from the item: background knowledge, a quotation, a worked example, a model, a visual explanation or a starting bibliography. That purpose should guide the depth of reading and the notes you keep. Doxxly helps locate and navigate the source; careful interpretation remains the reader's responsibility.

Explore more Science & Engineering resources

Frequently asked questions about CT-Scan Image Segmentation of Liver Cancer Using the Active Contour Method

Practical answers about reading, downloading and understanding this document on Doxxly.

More in Science & Engineering