Page 1 of 16Free preview · 1–5

About this document

This Nature Geoscience article reconstructs Mars’s crustal thickness about 4.2 billion years ago by removing the modeled contributions of four major impact basins and large volcanic features. The reconstruction reduces crustal thickness variations but preserves the hemispheric dichotomy. It reveals a distinct Terra Cimmeria - Sirenum crustal block associated with thick crust, strong magnetic anomalies and elevated potassium and thorium abundances. The findings suggest that the southern highlands comprise multiple crustal blocks with different geological histories rather than a single homogeneous terrain. Whether the identified block is analogous to terrestrial continental crust remains uncertain.

Free preview text

The first 5 pages, shown as text so search engines and readers can find this document.

Page 1

Articles https://doi.org/10.1038/s41561-019-0512-61GEOPS – Géosciences Paris Sud, Univ. Paris-Sud, CNRS, Université Paris-Saclay, Orsay, France. 2IMCCE – Observatoire de Paris, CNRS-UMR 8028, Paris, France. 3California Institute of Technology, Pasadena, CA, USA. 4Geosciences Environnement Toulouse, UMR 5563 CNRS, IRD & Université de Toulouse, Toulouse, France. 5Laboratoire de Planétologie et Géodynamique, CNRS UMR 6112, Université de Nantes, Université d’Angers, Nantes, France. 6Lunar and Planetary Laboratory, University of Arizona, Tucson, AZ, USA. 7Institut de Minéralogie, de Physique des Matériaux, et de Cosmochimie (IMPMC) – Sorbonne Université- Muséum National d’Histoire Naturelle, UPMC Université Paris 06, UMR CNRS 7590, IRD UMR 206, Paris, France. 8Department of Earth, Environmental and Planetary Sciences, Rice University, Houston, TX, USA. *e-mail: sylvain.bouley@u-psud.fr The crust of Mars has been shaped by 4.5 Gyr of meteorite impacts, volcanism, tectonism and surface processes (Fig. 1a,b). Its most prominent crustal features are the hemispheric dichotomy, the Tharsis volcanic province and several large impact basins. The hemi- spheric dichotomy describes Mars’s north–south asymmetry, where the northern lowlands have roughly half the crustal thickness of the southern highlands. The Tharsis volcanic province represents the thickest region of the crust and is associated with a prominent topo- graphic rise responsible for deformation of the lithosphere at a plan- etary scale1. Whereas the crustal thickness of Tharsis is considered to be the result of magmatic intrusions and volcanic eruptions, the origin of the hemispheric dichotomy is more enigmatic. Past studies have suggested that the hemispheric crustal dichotomy is the result of either giant impact(s)2,3 or hemispheric-scale mantle upwelling4,5. While previous studies have quantified the contribution of Tharsis to Mars’s gravity field1, crustal thickness6 and topogra- phy7, the contribution of impact basins to the crustal structure has never been quantified. Mars has four giant (diameters >1,000 km) unequivocal impact basins with unambiguous gravity field anom- alies and expressions in crustal thickness maps (Hellas, Argyre, Utopia and Isidis), but only three of them have a significant topo- graphic expression (Hellas, Argyre and Isidis). Utopia has a muted topographic signature, due to its early formation and possible crustal relaxation8. The four impacts (Hellas, Argyre, Isidis and Utopia) predate Tharsis, and extensively modified Mars’s crustal structure. For example, Hellas is surrounded by an annulus of high-standing topography and thickened crust, which has been interpreted to be the consequence of ejecta deposits and crustal thickening during crater excavation and collapse9–11 (Extended Data Fig. 1). Several outcrops in Terra Cimmeria and Terra Sirenum are interpreted as a veneer of Hellas ejecta over older crust—roughly four crater radii away from the centre of the basin12. Investigations of lunar gravity and topography, coupled with hydrocode impact simulations, have suggested that the Moon’s hemispheric dichotomy (where the far- side crust is about twice as thick as the nearside crust) may be par- tially explained by the deposition of a thick ejecta blanket around the giant South Pole–Aitken impact basin13,14. Extrapolating these results to Mars, it appears necessary to determine the contribution of large impact basins to its present crustal structure. Reconstructing Mars without impact basins and volcanoes There are many methods for isolating, characterizing and removing the contribution of impact basins and volcanoes from the gravity field and topography of planets—each with varying degrees of com- plexity1,6,15,16. In this work we develop a method for removing these features using crustal thickness maps17,18 (Fig. 1c,d). These maps— which are derived from topography and gravity data (Methods)— can be used for reconstruction of the early crustal structure with conservation of mass arguments. The present crustal thickness model (model B, ref. 18) accounts for higher crustal densities in vol- canic complexes (2,900 kg m−3), lower crustal densities elsewhere (2,582 kg m−3) and a mantle density of 3,500 kg m−3. To simplify calculations, the crustal thickness was rescaled at every location to the same crustal density (that is, we increase (decrease) the crustal A thick crustal block revealed by reconstructions of early Mars highlands Sylvain Bouley 1,2*, James Tuttle Keane 3, David Baratoux4, Benoit Langlais5, Isamu Matsuyama 6, Francois Costard1, Roger Hewins7, Valerie Payré8, Violaine Sautter7, Antoine Séjourné1, Olivier Vanderhaeghe 4 and Brigitte Zanda2,7 The global-scale crustal structure of Mars is shaped by impact basins, volcanic provinces, and a hemispheric dichotomy with a thin crust beneath the northern lowlands and a thick crust beneath the southern highlands. The southern highlands are com- monly treated as a coherent terrain of ancient crust with a common origin and shared geologic history, plausibly originating from a giant impact(s) or a hemispheric-scale mantle upwelling. Previous studies have quantified the contribution of volcanism to this crustal structure; however, the influence of large impacts remains unclear. Here we present reconstructions of the past crustal thickness of Mars (about 4.2 Gyr ago) where the four largest impact basins (Hellas, Argyre, Isidis and Utopia) are removed, assuming mass conservation, as well as the main volcanic provinces of Tharsis and Elysium. Our reconstruction shows more subdued crustal thickness variations than at present, although the crustal dichotomy persists. However, our reconstruc- tion reveals a region of discontinuous patches of thick crust in the southern highlands associated with magnetic and geochemi- cal anomalies. This region, corresponding to Terra Cimmeria–Sirenum, is interpreted as a discrete crustal block. Our findings suggest that the southern highlands are composed of several crustal blocks with different geological histories. Such a complex architecture of the southern highlands is not explained by existing scenarios for crustal formation and evolution. NATuRe GeOSCIeNCe | www.nature.com/naturegeoscience

Page 2

Articles Nature GeoscieNcethickness in regions of high (low) density until the crustal density is globally uniform). This lets us use crustal mass and crustal volume conservation interchangeably. We assume that impacts and volcanoes modify the crustal struc- ture symmetrically about their centres, and that impact basins reshape the crust in a manner that approximately conserves crustal 12 km 10 km 8 km 6 km 4 km 2 km 0 km −2 km −4 km −6 km −8 km Topography a b c d e f 55 km 50 km 45 km 40 km 35 km 30 km 25 km 20 km 15 km Crustal thickness 55 km 50 km 45 km 40 km 35 km 30 km 25 km 20 km 15 km Crustal thickness, with impact basins and volcanoes removed ? ? Tharsis Rise Alba Patera Elysium Mons Hellas Planitia Utopia Planitia Borealis Isidis Planitia Argyre Planitia Olympus Mons Hellas Planitia Tharsis Rise Isidis Planitia Utopia Planitia Argyre Planitia Alba Patera Ascraeus Mons Pavonis Mons Arsia Mons Terra Cimmeria Terra Sirenum Terra Cimmeria– Sirenum crustal block Borealis Gale Crater Thaumasia Thaumasia Fig. 1 | A global view of the crustal structure of Mars. a,b, The Mars Orbiter Laser Altimeter topography of Mars with the features of interest labelled9. c,d, The crustal thickness of Mars based on crustal model B (ref. 18, Methods). e,f, The crustal thickness of Mars after removing all of the large impact basins and volcanic features. The Cimmeria–Sirenum crustal block is enclosed by a dash–dot line. The question mark to the east of the block indicates the unclear boundary between the Thaumasia region and the Cimmeria–Sirenum block due to the possible specific origin of Thaumasia19. The maps are in Lambert azimuthal equal- area projection, centred on the equator at longitudes 0° (left column) and 180° (right column). Each map covers all of Mars except for a small region antipodal to the map centre. The maps are overlaid on the present-day topography for reference. Grid lines are in increments of 30° of latitude and longitude. NATuRe GeOSCIeNCe | www.nature.com/naturegeoscience

Page 3

ArticlesNature GeoscieNcemass. Figure 2 shows an example of our fitting process for the Hellas basin. To remove the feature of interest, we first calculate the azi- muthally averaged crustal thickness as a function of distance from the centre of the feature (Fig. 2a). Next, we define an annulus out- side the feature (the ‘transition zone’, Fig. 2a,b), which we take to represent the background crustal thickness. We calculate the mean crustal thickness in the transition zone, and then calculate the mass of crustal material above and below that datum within the ‘fitting zone’. If the mass above the datum (the mass excess) equals the mass below the datum (the mass deficit), then we deem the background crustal thickness to be a mass-conserving solution. We include a cosine taper to prevent discontinuities in the corrected crustal thickness map. For each feature of interest, we performed a param- eter-space search for mass-conserving crustal structure correc- tions—testing a range of possible transition zone radii and widths (Extended Data Fig. 3). In cases where multiple mass-conserving solutions are found, we select the solution that makes the smallest change to the crustal structure. In cases where no mass-conserving solution is found, we select the solution that comes closest to con- serving mass. While the formation of impact basins should conserve crustal mass, the same cannot be assumed for large volcanic edifices (as the erupted mass may be derived from the mantle and not the crust). Thus, for removing volcanoes, we prescribe a nominal angu- lar radius of the feature based on the slope break at its edge that is identified on the azimuthally averaged crustal thickness profiles. We then remove the crustal mass above the background, defined from an average value in an annulus surrounding the volcanic prov- ince (Extended Data Fig. 4). Using this technique, we sequentially isolated and removed the axisymmetric crustal thickness structures associated with the four largest impact basins (Hellas (Fig. 2), Argyre, Isidis and Utopia), Elysium Mons and the Tharsis Rise, plus the five largest individual volcanoes: Olympus Mons, Arsia Mons, Pavonis Mons, Ascraeus Mons and Alba Patera. This method is iterative and nonlinear. That is, starting with the present crustal thickness of Mars, we remove one feature, and then use that iterated crustal thickness as the starting point for removing the next feature, and so on (Extended Data Fig. 5). This means that the resulting corrected crustal struc- ture depends a priori on the order in which we remove features, although the effect of the order is minimal if the features are distant enough from each other, which is the case here. To evaluate this dependence, we repeated this analysis using randomized removal sequences. We find that the solution is only weakly dependent on the order of removal (Methods). With this precaution taken, our nominal solution uses a removal sequence based on our current knowledge of the relative chronology of basins and volcanoes8, from youngest to oldest: Elysium, Olympus and Tharsis montes, Tharsis Rise, Argyre, Isidis, Hellas and Utopia. Subdued thickness variations of the early Martian crust Removing impact basins and volcanic constructs reveals more sub- dued crustal thickness variations (Figs. 1e,f and 3). The hemispheric dichotomy persists in the reconstruction. Hellas contributes to the southern highlands, but excavation of the basin and emplacement 0 15 30 45 60 75 90 105 120 135 150 165 180 Distance (°) 0 20 40 60 80 100 Crustal thickness (km) 0 a b 1 2 3 4 5 6 7 8 9 10 Distance (feature radii) 0 1 2 3 4 5 6 7 8 9 10 Distance (feature radii) 0 15 30 45 60 75 90 105 120 135 150 165 180 0 0.5 1 Filter Distance (°) Mass excessMass deficit Feature radius Fitting zone Transition zone Fitting zone filter, h Transition zone filter, g Fig. 2 | The radial crustal structure of Hellas Planitia. a, The azimuthally average crustal thickness about Hellas (solid black line with hatching beneath). We calculate the mean crustal thickness in the transition zone, and then calculate the mass of crustal material above and below that datum within the ‘fitting zone’. The mass above the mass-conserving crustal thickness (the mass excess, red) integrated in an annulus around the feature is equal to the mass below it (the mass deficit, blue). The peak at 180° distance is Alba Patera, which is approximately antipodal to Hellas. b, The fitting and transition zone filters used in this reconstruction (Methods). 42.8 ± 12.8 40.0 ± 7.8 30.3 ± 3.7 45.0 ± 7.7 43.1 ± 4.8 50.8 ± 2.7 54.2 ± 20.3 10 15 20 25 30 35 40 45 50 55 60 65 70 >75 0 1 2 3 4 5 6 a b Fractional surface area (%) 0 1 2 3 4 5 6 7 Fractional surface area (%) Mars’s present crustal thickness Mars’s crustal thickness without volcanoes and impact basins Crustal thickness (km) 10 15 20 25 30 35 40 45 50 55 60 65 70 >75 Crustal thickness (km) Southern highlands (excluding Cimmeria– Sirenum) Northern lowlands Total Cimmeria– Sirenum Southern highlands Northern lowlands Total Tharsis and Elysium Tharsis and Elysium (excluding Cimmeria– Sirenum) 8 31.4 ± 2.9 38.9 ± 6.7 Fig. 3 | Histograms of crustal thickness of three domains (northern lowlands, southern highlands and Cimmeria–Sirenum) of the Martian crust. a, Mars's present crustal thickness. b, Mars’s crustal thickness without volcanoes and impact basins. Note that the contribution of Tharsis and Elysium is isolated to the northern lowlands to visualize the residual contribution after removal. The black histograms show the global distribution of crustal thickness; when summed together, those coloured histograms equal the global histogram. The horizontal error bars indicate the mean and standard deviation for each respective distribution. NATuRe GeOSCIeNCe | www.nature.com/naturegeoscience

Page 4

Articles Nature GeoscieNceof ejecta are unable to explain the entire dichotomy; the mass excess in the southern highlands is about four times larger than the mass deficit within the Hellas basin. However, after removing all of the large impact basins and vol- canic features, the crustal thickness map highlights a crustal block characterized by discontinuous, thick (>50 km) regions corre- sponding to Terra Cimmeria–Sirenum (Fig. 1e,f). We delineated the boundary of this block such that it includes all of the neighbour- ing >50-km-thick crustal segments (Extended Fig. 6). We excluded the Thaumasia region, even though it has comparable thickness, because it may have a different tectonic (orogenic) history19. The relation between the most eastern part of the Terra Cimmeria– Sirenum crustal block and Thaumasia is unclear (Fig. 1e,f). The distribution of crustal thicknesses suggests that the early Martian crust can be divided into three main crustal domains hav- ing characteristic thickness ranges that partially overlap (Fig. 3b): the northern lowlands with a thickness of between 20 and 38 km (centred at 33 km); the southern highlands—including Arabia Terra, Hellas and Argyre—with an intermediate thickness of between 30 and 55 km (centred at 46 km); and the Terra Cimmeria–Sirenum block with a thickness of between 42 and 60 km (centred at 50 km). A thick crustal block in the southern highlands The Cimmeria–Sirenum crustal block is also noticeable because it shares many of the characteristics of terrestrial continental crust. On Earth, continental crust is derived via differentiation and re- melting of pre-existing basaltic crust. It possesses an intermediate composition between felsic and mafic, is enriched in incompatible elements, and is associated with thicker crust and elevated topogra- phy. The Terra Cimmeria–Sirenum region is associated with anom- alously elevated pre-Tharsis topography20 (Extended Data Fig. 7) and includes the strongest crustal magnetic anomalies21–24 (Fig. 4a), which, by comparison with the Earth, could correspond to the accre- tion of terranes25. Terra Cimmeria–Sirenum is also associated with some of the highest surface (down to the first metre) abundances of potassium (K) and thorium (Th) (Fig. 4b,c)26. This region is the only place in the southern terrains where K and Th are correlated. Within this region, lower concentrations of K and Th are noted in the region near the south pole, where ground ice may mask the true (ice-free) K and Th (ref. 26). Only the most eastern part of the crustal block (~10% of its surface area) is not associated with these geochemi- cal and magnetic anomalies. Possible fragments of continental crust have been found with in situ observations by the Curiosity rover at Gale crater27 on the northern edge of the Cimmeria–Sirenum block (Fig. 1a). While this interpretation appears inconsistent with the vast amount of spectroscopic observations suggesting that the sur- face of this region is dominated by basaltic rock28, it is plausible that these basalts are surficial deposits overlying a geochemically distinct crust. This would explain why exposed continental components are rare in the southern hemisphere29. The existence of (at least) one crustal block on Mars makes the pre-Noachian geologic history of Mars—and the origin of the hemispheric dichotomy—much more complex than previously rec- ognized. We identify a regional-scale crustal block covering 10% of Mars. Geophysical and geochemical signatures in this region are suggestive of a geochemically evolved crustal component. Combined with the identification of continental crust-like material on Mars in specific outcrops30, and inferred from meteoritic samples containing zircons27,31,32, our findings suggest that the Cimmeria– Sirenum crustal block had a complex geologic history, whether or 10 Magnetic field intensity (nT) 100 1,000 a b c 10,000 0.2 Potassium abundance (wt%) 0.3 0.4 0.5 Geochemically altered 0.3 Thorium concentration (ppm) 0.4 0.5 0.6 0.7 0.8 0.9 Geochemically altered Fig. 4 | The geophysical and geochemical signature of the Cimmeria– Sirenum block. a, The magnetic field intensity, evaluated at the surface of Mars24. b, The potassium concentration (wt%)26. c, The thorium concentration (ppm)26. In b and c, the northern hemisphere is hatched out to focus attention on the signatures south of the dichotomy. The maps are in Lambert azimuthal equal-area projection, centred on 0°, and cover all of Mars except for a small region on the opposite hemisphere. The maps are overlaid on the present-day topography for reference. The Cimmeria– Sirenum crustal block is enclosed by a dash-dot line. NATuRe GeOSCIeNCe | www.nature.com/naturegeoscience

Page 5

ArticlesNature GeoscieNcenot it is analogous to terrestrial continental crust. Since this ter- rain is overprinted by the Hellas and Argyre basins, it is probably the oldest part of the crust. Subsequent large impacts significantly altered Mars’s crustal structure and contributed to the observed hemispheric dichotomy. Therefore, the southern highlands should not be considered as a single, homogeneous unit (requiring a single formation mechanism), but rather a collection of crustal blocks with plausibly different origins, variably affected by magmatic, tectonic and impact processes. The formation mechanism of several crustal blocks during the pre-Noachian (before 4.1 Gyr ago) remains to be deciphered and has important implications for the planet’s evolution, including its climate, the surface environment and the mantle dynamics. Online content Any methods, additional references, Nature Research reporting summaries, source data, extended data, supplementary informa- tion, acknowledgements, peer review information; details of author contributions and competing interests; and statements of data and code availability are available at https://doi.org/10.1038/s41561- 019-0512-6. Received: 26 January 2019; Accepted: 19 November 2019; Published: xx xx xxxx References 1. Zuber, M. T. & Smith, D. E. Mars without Tharsis. J. Geophys. Res. 102, 28673–28686 (1997). 2. Wilhelms, D. E. & Squyres, S. W. The martian hemispheric dichotomy may be due to a giant impact. Nature 309, 138–140 (1984). 3. Frey, H. & Shultz, R. A. Large impact basins and the mega-impact origin for the crustal dichotomy on Mars. Geophys. Res. Lett. 15, 229–232 (1988). 4. Zhong, S. & Zuber, M. T. Degree-1 mantle convection and the crustal dichotomy on Mars. Earth Planet. Sci. Lett. 189, 75–84 (2001). 5. Roberts, J. H. & Zhong, S. Degree-1 convection in the Martian mantle and the origin of the hemispheric dichotomy. J. Geophys. Res. 111, E06013 (2006). 6. Andrews-Hanna, J. C., Zuber, M. T. & Banerdt, W. B. The Borealis basin and the origin of the martian crustal dichotomy. Nature 453, 1212–1215 (2008). 7. Matsuyama, I. & Manga, M. Mars without the equilibrium rotational figure, Tharsis, and the remnant rotational figure. J. Geophys. Res. Planets 115, 12020 (2010). 8. Fassett, C. I. & Head, J. W. Sequence and timing of conditions on early Mars. Icarus 211, 1204–1214 (2011). 9. Smith, D. E. et al. The global topography of Mars and implications for surface evolution. Science 284, 1495–1503 (1999). 10. Zuber, M. T. et al. Internal structure and early thermal evolution of Mars from Mars Global Surveyor topography and gravity. Science 287, 1788–1793 (2000). 11. Zuber, M. The crust and mantle of mars. Nature 412, 220–227 (2001). 12. Irwin, R. P., Tanaka, K. L. & Robbins, S. J. Distribution of Early, Middle, and Late Noachian cratered surfaces in the Martian highlands: implications for resurfacing events and processes. J. Geophys. Res. Planets 118, 278–291 (2013). 13. Melosh, H. J. et al. South Pole–Aitken basin ejecta reveal the Moon’s upper mantle. Geology 45, 1063–1066 (2017). 14. Zuber, M. T., Smith, D. E., Lemoine, F. G. & Neumann, G. A. The shape and internal structure of the Moon from the clementine mission. Science 266, 1839–1843 (1994). 15. Keane, J. T. & Matsuyama, I. Evidence for lunar true polar wander and a past low-eccentricity, synchronous lunar orbit. Geophys. Res. Lett. 41, 6610–6619 (2014). 16. Garrick-Bethell, I., Perera, V., Nimmo, F. & Zuber, M. T. The tidal-rotational shape of the Moon and evidence for polar wander. Nature 512, 181–184 (2014). 17. Genova, A. et al. Seasonal and static gravity field of Mars from MGS, Mars Odyssey and MRO radio science. Icarus 272, 228–245 (2016). 18. Goossens, S. et al. Evidence for a low bulk crustal density for Mars from gravity and topography. Geophys. Res. Lett. 44, 7686–7694 (2017). 19. Nahm, A. L. & Schultz, R. A. Evaluation of the orogenic belt hypothesis for the formation of the Thaumasia highlands, Mars. J. Geophys. Res. 115, E04008 (2010). 20. Bouley, S. et al. Late Tharsis formation and implications for early Mars. Nature 531, 344–347 (2016). 21. Connerney, J. E. P. et al. The global magnetic field of Mars and implications for crustal evolution. Geophys. Res. Lett. 28, 4015–4018 (2001). 22. Arkami-Hamed, J. A coherent model of the crustal magnetic field of Mars. J. Geophys. Res. 109, E09005 (2004). 23. Langlais, B., Purucher, M. E. & Mandea, M. Crustal magnetic field of Mars. J. Geophys. Res. 109, E02008 (2004). 24. Langlais, B. et al. A new model of the crustal magnetic field of Mars using MGS and MAVEN. J. Geophys. Res. Planets 124, 1542–1569 (2019). 25. Fairén, A. G., Ruiz, J. & Anguita, F. An origin for the linear magnetic anomalies on Mars through accretion of terranes: implications for dynamo timing. Icarus 160, 220–223 (2002). 26. Boynton, W. V. et al. Concentration of H, Si, Cl, K, Fe, and Th in the low- and mid-latitude regions of Mars. J. Geophys. Res. 112, E12S99 (2007). 27. Sautter, V. et al. In situ evidence for continental crust on early Mars. Nat. Geosci. 8, 605–609 (2015). 28. Rogers, A. D. et al. Global spectral classification of Martian low-albedo regions with Mars Global Surveyor Thermal Emission Spectrometer (MGS-TES) data. J. Geophys. Res. 112, E02004 (2007). 29. Baratoux, D. et al. Petrological constraints on the density of the Martian crust. J. Geophys. Res. Planets 119, 1707–1727 (2014). 30. Christensen, P. R. et al. Evidence for magmatic evolution and diversity on Mars from infrared observations. Nature 436, 504–509 (2005). 31. Humayun, M. et al. Origin and age of the earliest Martian crust from meteorite NWA 7533. Nature 503, 513–516 (2013). 32. Bouvier, L. C. et al. Evidence for extremely rapid magma ocean crystallization. Nature 586, 586–589 (2018). Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations. © The Author(s), under exclusive licence to Springer Nature Limited 2020 NATuRe GeOSCIeNCe | www.nature.com/naturegeoscience

Tags

Doxxly editorial guide

A thick crustal block revealed by reconstructions of early Mars highlands: summary, contents and background

This guide helps you understand the scope of A thick crustal block revealed by reconstructions of early Mars highlands before or alongside reading the original document. It is based on the catalogue record, credited creator, source, classification and topics shown on this page. It does not replace the original work and does not invent claims about passages that Doxxly cannot verify.

Summary and overview

A thick crustal block revealed by reconstructions of early Mars highlands is a 16-page documentcredited to Nadia G. Vance. This Nature Geoscience article reconstructs Mars’s crustal thickness about 4.2 billion years ago by removing the modeled contributions of four major impact basins and large volcanic features. The reconstruction reduces crustal thickness variations but preserves the hemispheric dichotomy. It reveals a distinct Terra Cimmeria - Sirenum crustal block associated with thick crust, strong magnetic anomalies and elevated potassium and thorium abundances. The findings suggest that the southern highlands comprise multiple crustal blocks with different geological histories rather than a single homogeneous terrain. Whether the identified block is analogous to terrestrial continental crust remains uncertain. It appears in the Science & Engineering collection, which groups it with other material that readers may use for comparison and further study.

The item can be approached in several ways. A reader looking for a quick orientation can begin with the free five-page preview, inspect the page structure and use the metadata to judge relevance. Someone undertaking deeper research can work through the complete file, search its indexed text, record useful page references and compare its treatment of Mars, Planetary geology, Crustal thickness, Southern highlands, Terra Cimmeria - Sirenum, Impact basins, Volcanism, Hemispheric dichotomy, Geophysics, Geochemistry with the related resources linked below.

Rather than reducing the work to a single claim, this page treats it as a source that should be read in context. The title, creator, publication source, licence and format all help explain what kind of evidence it may offer. Readers should distinguish the original author's statements from Doxxly's catalogue description, and should cite the original edition when using the material in academic, professional or published work.

Key topics and reader takeaways

The catalogue connects this document with Mars, Planetary geology, Crustal thickness, Southern highlands, Terra Cimmeria - Sirenum, Impact basins, Volcanism, Hemispheric dichotomy, Geophysics, Geochemistry. These terms offer practical entry points rather than a substitute for close reading. Start by identifying the definitions, examples, arguments, tables or visual explanations attached to each topic. Then note where the creator draws connections, makes distinctions or moves from background material to a conclusion, recommendation, calculation or narrative development.

A useful reading method is to separate description from interpretation. First record what the item actually presents: names, headings, figures, formulas, quotations or stated propositions. Next consider why those details matter within the whole work. Finally compare them with another source from the same subject area. This process helps turn a long digital file into evidence that can be evaluated rather than merely skimmed.

Table of contents and reading guide

The following is an editorial content guide based on the verified catalogue topics. It is not represented as the original author's formal table of contents. Use it to organise notes while moving through the 16 pages in the player.

  1. Part 1

    Mars

    Use this section of the reading guide to identify how Mars appears in A thick crustal block revealed by reconstructions of early Mars highlands, note important terms, and connect the subject to the wider purpose of the work.

  2. Part 2

    Planetary geology

    Use this section of the reading guide to identify how Planetary geology appears in A thick crustal block revealed by reconstructions of early Mars highlands, note important terms, and connect the subject to the wider purpose of the work.

  3. Part 3

    Crustal thickness

    Use this section of the reading guide to identify how Crustal thickness appears in A thick crustal block revealed by reconstructions of early Mars highlands, note important terms, and connect the subject to the wider purpose of the work.

  4. Part 4

    Southern highlands

    Use this section of the reading guide to identify how Southern highlands appears in A thick crustal block revealed by reconstructions of early Mars highlands, note important terms, and connect the subject to the wider purpose of the work.

  5. Part 5

    Terra Cimmeria - Sirenum

    Use this section of the reading guide to identify how Terra Cimmeria - Sirenum appears in A thick crustal block revealed by reconstructions of early Mars highlands, note important terms, and connect the subject to the wider purpose of the work.

  6. Part 6

    Impact basins

    Use this section of the reading guide to identify how Impact basins appears in A thick crustal block revealed by reconstructions of early Mars highlands, note important terms, and connect the subject to the wider purpose of the work.

  7. Part 7

    Volcanism

    Use this section of the reading guide to identify how Volcanism appears in A thick crustal block revealed by reconstructions of early Mars highlands, note important terms, and connect the subject to the wider purpose of the work.

  8. Part 8

    Hemispheric dichotomy

    Use this section of the reading guide to identify how Hemispheric dichotomy appears in A thick crustal block revealed by reconstructions of early Mars highlands, note important terms, and connect the subject to the wider purpose of the work.

When a heading in the original differs from this guide, follow the original heading in your citation. Page numbers can also vary between editions. Doxxly's direct page field is useful for navigation, but formal references should include the title, creator, source and edition details available in the file itself.

About Nadia G. Vance

Doxxly credits Nadia G. Vance as the author or creator of A thick crustal block revealed by reconstructions of early Mars highlands. This page does not add an unverified biography, job title or institutional affiliation. The attribution is preserved so readers can distinguish the creator from the hosting library and follow the original record when an external author link is available.

Author context matters because a work reflects a particular purpose, audience and point of view. Before relying on the material, consider what the creator set out to explain, when the source was produced and whether later research or revised guidance should also be consulted. For literature and philosophy, compare translations and editions; for technical material, check whether a newer version has superseded the one shown here.

About the source organisation

The recorded source for this item is eps.rutgers.edu. Doxxly provides access and discovery tools but does not claim to be the original publisher unless explicitly stated. Source links, creator attribution and the recorded Publicly available file collected for editorial review licence are displayed to help readers assess provenance and permitted use.

Provenance is especially important for reports, standards, presentations and working spreadsheets. Check the original source for amendments, supporting files and current policy. A trustworthy research workflow keeps the source URL with any notes or downloaded copy, verifies important figures against the original, and avoids treating an archived document as automatically current.

Visit eps.rutgers.edu

How to read and use this document

Begin with the title and opening pages, then use the guide above to decide whether to read sequentially or move to a particular topic. The Doxxly player provides previous and next navigation, a direct page field, zoom steps, fit-to-width and fit-to-page modes, rotation and fullscreen. These controls are useful when a page contains small type, a wide table, an image, a scanned layout or a dense sequence of notes.

The first five pages are open to every visitor. A plan unlocks the complete item and full-document search. Search is best used for distinctive names, technical terms or short phrases; broad words can produce too many possible contexts. When you find a useful passage, read the surrounding pages so that a sentence, chart or formula is not separated from its explanation.

If downloading is enabled, members can obtain the original PDF file. Keep the original format when formulas, slide sequencing, pagination or layout carries meaning. Respect the Publicly available file collected for editorial review terms displayed on this page, and use the rights-report link if you believe the attribution or availability needs review.

Research questions to consider

As you read A thick crustal block revealed by reconstructions of early Mars highlands, ask which audience the creator addresses, what problem or idea organises the work, what evidence is presented, and which assumptions remain unstated. Note whether important terms are defined consistently and whether examples represent a broader pattern or a narrow case. For quantitative material, record units, time periods, formulas and data sources. For interpretive material, separate the creator's language from your own summary.

A second set of questions concerns relevance today. Which parts remain durable, which depend on their historical or institutional setting, and what would need confirmation from a newer source? Following the tags and the Science & Engineering collection can reveal useful comparisons. Agreement between sources can strengthen confidence, while disagreement can point to changing definitions, methods, evidence or priorities.

Finally, decide what you need from the item: background knowledge, a quotation, a worked example, a model, a visual explanation or a starting bibliography. That purpose should guide the depth of reading and the notes you keep. Doxxly helps locate and navigate the source; careful interpretation remains the reader's responsibility.

Explore more Science & Engineering resources

Frequently asked questions about A thick crustal block revealed by reconstructions of early Mars highlands

Practical answers about reading, downloading and understanding this document on Doxxly.

More in Science & Engineering