This paper examines rarefied-flow predictions supporting the design, mission planning, and aerobraking operations of Mars Global Surveyor. Direct Simulation Monte Carlo (DSMC) and free-molecular methods are used to analyze aerodynamic heating, drag, solar panel deflections, and gas-surface interactions. Transitional-flow calculations predict solar panel heating reductions of up to 40% relative to free-molecular values and drag coefficient reductions of up to 15% at the highest modeled atmospheric density. The study also addresses the spacecraft’s partially deployed solar panel, momentum accommodation differences, and possible CO2 evaporation effects. The simulated evaporation rates did not adequately explain observed axial acceleration perturbations.
Free preview text
The first 5 pages, shown as text so search engines and readers can find this document.
Page 1
Rare ed Aerothermo dynamic Predictions for
Mars Global Surveyor
R. G. Wilmoth1 , D. F. G. Rault1 , R. W. Shane2 , R. H. Tolson2
1 NASA Langley Research Center, Hampton, VA, USA
2 George Washington University, Hampton, VA, USA
1 Intro duction
Mars Global Surveyor (MGS) successfully completed its rst phase of aero-
braking in early 1998 and is the rst planetary mission to use aerobrak-
ing as a primary means of customizing its orbit to achieve its mission
ob jectives [1]. The aerobraking requirements together with p ost-launch
anomalies [2] presented a unique challenge to provide accurate predictions
of the aerothermo dynamic environment of the spacecraft in the rare ed
transitional ow regime. Direct Simulation Monte Carlo (DSMC) and free-
molecular techniques were used to provide heating and aero dynamic predic-
tions and to investigate a variety of rare ed ow phenomena across the ight
regime [3, 4, 5]; MGS is the rst ma jor planetary mission in which rare ed-
ow predictions have played such a critical role all the way through the
design, mission planning, and op erational phases. This pap er summarizes
these studies with emphasis on transitional- ow and gas-surface interaction
phenomena.
2 Computational Approach
Analyses were carried out using the NASA LaRC 3D DSMC (LaRC-3D)
co de [6], the DAC (DSMC Analysis Co de) co de [7], and companion 3D free-
molecular co des develop ed in recent years for analyzing complex geometries.
The DSMC co des di er primarily in their computational grid metho dology
and mo deling of the surface geometry. However, b oth DSMC co des use
essentially the same DSMC pro cedures and physical mo dels and are capable
of handling the complex geometry of the MGS spacecraft. The DSMC co des
are complemented by 3D free-molecular co des which use analytical free-
molecular analysis and line-of-sight shadowing techniques to mo del the ow
ab out complex geometries. Analysis of MGS aero dynamics and heating was
p erformed primarily using LaRC-3D in the design phase and in the early
1
Page 2
21st International Symp osium on Rare ed Gas Dynamics
p ost-launch, pre-aerobraking phase, while DAC was used primarily in the
later p ost-launch, pre-aerobraking phase and in the early op erational phase
of aerobraking.
Calculations were p erformed for a variety of solar panel p ositions and space-
craft attitudes and for atmospheric densities ranging from free-molecular to
transitional ow (Knudsen numb ers < 0.1). The comp osition of the Mars
atmosphere was assumed to b e 95.37% CO2 and 4.63% N2 by mole. Colli-
sions were mo deled with the Variable Hard Sphere mo del of Bird[8] using a
reference temp erature of 3000 K, a temp erature exp onent of 0.806638, and
reference diameters of 3:8969 1010
m and 3:3487 1010
m for CO2 and
N2 , resp ectively. Gas-surface interactions were mo deled as a combination of
di use and sp ecular scattering. The e ects of CO2 evap oration were studied
and mo deled as a simple steady-state outgassing pro cess.
3 Spacecraft Geometry and Mo deling Issues
The geometry of the MGS spacecraft in the aerobraking con guration is
shown in Fig. 1. The solar panels are swept back to reduce aero dynamic
heating and to provide aero dynamic stability. The pre-launch design called
for b oth panels to b e swept 30 deg to give essentially a symmetric con-
guration. However, when the panels were deployed after launch, the -Y
panel failed to fully extend due to what was determined to b e a jammed
hinge b etween the yoke and the inner solar panel [2]. This failure left the
-Y panel approximately 20 deg short of full deployment and resulted in a
con guration that would not have b een suciently sti when sub jected to
aero dynamic moments ab out the X-axis. The problem was resolved by ro-
tating the -Y panel 180 deg ab out its principal axis and sweeping the yoke
51 deg aft to comp ensate for the 20 deg shortfall in panel deployment. The
+Y panel of this revised aerobraking con guration was swept to approxi-
mately 33.8 deg to provide the desired aero dynamic trim ab out the X-axis.
The revised con guration also provided greater sti ness to aero dynamic
moments ab out the X-axis although small de ections of the -Y panel ab out
the unlatched hinge were exp ected. These de ections were computed and
taken into account when extracting atmospheric density from the on-b oard
accelerometer measurements [9].
4 Results
4.1 Aero dynamic Heating
One of the early design considerations was the aero dynamic heating that
would o ccur on the solar panels during aerobraking. Although the estimated
2
Page 3
Marseille, France, July 26-31, 1998
heating levels were relatively low, the allowable temp eratures on the solar
panel still limited the depth to which the spacecraft could p enetrate the
Martian atmosphere without exceeding these temp eratures. The maximum
atmospheric densities exp ected at p eriapsis placed the spacecraft well into
transitional ow, and DSMC analyses were conducted to re ne the predicted
heating levels.
Figure 2 shows density contours around MGS at densities of 12 and 120
kg =km
3
where the higher value is approximately the maximum exp ected
density at p eriapsis. These predictions exhibit the typical di use sho ck
layers that o ccur in rare ed, transitional ows. The sho ck layer e ec-
tively \shields" the b o dy from receiving the full kinetic energy of freestream
molecules, and lo cal heating rates are signi cantly lower than free-molecular
values as seen in Fig. 3. This gure shows heat transfer co ecients, CH
( _q =( 1
2 1 V 3
1 )), along a diagonal cut on the windward side of the inb oard
solar panel, and reductions up to 40% are seen near the center of the panel
at the highest density. Such predictions were imp ortant for \calibrating"
temp erature sensors on the panels that were used to assess the actual heat-
ing levels in ight.
4.2 Drag During Aerobraking
Aerobraking dep ends on aero dynamic drag to slow the spacecraft by a small
velo city increment, V , on each pass. The total reduction in velo city re-
quired is determined by the nal orbit one wishes to achieve. The V
obtained on each aerobraking pass is directly prop ortional to the atmo-
spheric density and the drag co ecient of the spacecraft. To minimize the
time required to achieve nal orbit, it is desirable to p enetrate as deeply as
p ossible into the atmosphere and to maximize the drag co ecient. Figure 4
shows predictions of the drag co ecient over the density range of interest
for MGS. Predictions for the symmetric sweep pre-launch con guration ob-
tained with LaRC-3D and the revised sweep con guration obtained with
DAC are shown to demonstrate that drag variations for the two con gura-
tions are essentially the same. The drag co ecient is reduced up to 15%
at the highest density, and although this reduction may seem small, its
e ect on the total numb er aerobraking passes required can b e signi cant.
Therefore, DSMC predictions were imp ortant in the early design to provide
accurate predictions of the drag co ecient of MGS.
The impact of drag on aerobraking time is seen in Fig. 5 which shows a
history of MGS orbit parameters at p eriapsis over approximately the rst
eight months of op eration. The original mission called for a target orbit
p erio d of approximately two hours to b e achieved in ab out 120 days. (The
exact time required was sub ject to relatively large uncertainties in atmo-
spheric density.) However, excessive de ections of the partially-deployed -Y
3
Page 4
21st International Symp osium on Rare ed Gas Dynamics
solar panel during the rst few weeks caused a 30-day halt to aerobraking
while these de ections were analyzed. When aerobraking resumed, it was
decided to minimize the panel loads by aerobraking at lower densities and
to extend the total aerobraking phase to ab out 18 months which includes a
six-month non-aerobraking p erio d for obtaining science data.
4.3 Aero dynamic Solar Panel De ections
The partially-deployed -Y panel was not \latched" into a rigid p osition,
and de ections were exp ected during aero dynamic loading. These de ec-
tions were also exp ected to reduce the drag co ecient and alter the aero-
dynamic trim. Therefore, additional analyses were p erformed to provide
a more complete aero dynamic database for various panel de ections, and
two of the more imp ortant quantities, the drag co ecient, CD , and the
yawing moment ab out the X-axis, Cm;x , are shown in Fig. 6 for panel de-
ections of up to 20 deg. Drag reductions of 10-15% are predicted at the
maximum panel de ection, and trim angle, , ab out the X-axis is shifted
by ab out one-half of the de ection angle. These predictions were used to
extract atmospheric densities from the onb oard accelerometer data during
each aerobraking pass, and an iterative pro cedure was required to compute
the panel de ection consistent with the axial force co ecient, Cz , corre-
sp onding to that de ection. Figure 7 shows typical axial force co ecients
and computed panel de ections derived from ight data, and the de ec-
tions show relatively go o d agreement with indep endent measurements of
de ections made with an onb oard sun sensor [9].
4.4 Gas-Surface Interaction E ects
4.4.1 Momentum Accommo dation
The revised aerobraking con guration placed the glass-covered solar cells of
the -Y panel on the windward side, and di erences in momentum accom-
mo dation co ecients b etween the glass and the comp osite material on the
windward side of the +Y panel were exp ected. The main e ect of these
accommo dation co ecient di erences was exp ected to b e a change in aero-
dynamic trim ab out the X-axis. Therefore, free-molecular calculations were
rst p erformed for accommo dation co ecient di erences of up to 0.3 (ac-
tual di erences were exp ected to b e less than 0.2), and the predicted shift in
yaw trim angle is shown in Fig. 8. Although the predicted shifts are small,
they were imp ortant in assessing panel de ections in the early passes, and
a few DSMC calculations were made at a nominal density of 81 kg =km
3
to
further re ne the predictions. At this transitional ow density, the e ect of
accommo dation di erences is diminished considerably b ecause of molecular
collisions near the surface that cause partially accommo dated molecules to
4
Page 5
Marseille, France, July 26-31, 1998
have multiple surface collisions.
4.4.2 CO2 Evap oration
Accelerometer ight measurements have shown p erturbations in axial ac-
celeration during certain aerobraking passes that cannot b e explained by
known atmospheric density p erturbations or by spacecraft geometry. One
explanation considered is that the \cold" solar panels might adsorb sucient
CO2 which then rapidly evap orates during aero dynamic heating, and this
e ect has b een qualitatively evaluated using a simple \outgassing" mo del.
Evap oration of CO2 was mo deled on the windward surfaces of the solar pan-
els at various arbitrary rates to determine the e ect on axial force, and the
results are shown in Fig. 9. Evap oration ux rates of up to four times the
incident freestream ux were simulated at the relatively rare ed freestream
density of 12 kg =km
3
. Figure 9 shows the net change in axial force and
the comp onents caused by the \shielding" e ect pro duced by evap orating
molecules colliding with freestream molecules (a reduction in axial force or
drag) and the \thrust" exerted by the evap orating molecules as they leave
the surface. These e ects can b e qualitatively understo o d by examining the
streamlines around the spacecraft shown in Fig. 10 which clearly show the
\shielding" e ect as well as the streamlines emanating from the surface.
The evap oration rates simulated in this brief study did not pro duce su-
cient changes in axial force to explain the observed ight data. Furthermore,
estimates of the quantity of CO2 that might b e adsorb ed suggest that evap-
oration rates higher than those simulated are unlikely, although the mo del
used to make these estimates is sub ject to large uncertainties due to uncer-
tainties in surface phase e ects and heat of evap oration.
5 Concluding Remarks
Mars Global Surveyor has b een highly successful in demonstrating that aero-
braking can b e used to tailor a planetary orbit, and rare ed ow simulations
have contributed signi cantly to the successful design, mission planning,
and ight op erations. Engineering ight data obtained to date has pro-
vided added con dence in the aerothermo dynamic predictions, and b oth
the engineering and science data are providing a wealth of information on
planetary aerobraking and on the Mars environment.
References
[1] Dallas, S. Sam, Mars Global Surveyor Mission, Pro ceedings of IEEE
Aerospace Conference, Vol. 4, Snowmass at Asp en, CO, Feb. 1-8, 1997,
pp. 173-189.
5
Rarefied Aerothermodynamic Predictions for Mars Global Surveyor: summary, contents and background
This guide helps you understand the scope of Rarefied Aerothermodynamic Predictions for Mars Global Surveyor before or alongside reading the original document. It is based on the catalogue record, credited creator, source, classification and topics shown on this page. It does not replace the original work and does not invent claims about passages that Doxxly cannot verify.
Summary and overview
Rarefied Aerothermodynamic Predictions for Mars Global Surveyor is a 8-page documentcredited to Cleo I. Ellwood. This paper examines rarefied-flow predictions supporting the design, mission planning, and aerobraking operations of Mars Global Surveyor. Direct Simulation Monte Carlo (DSMC) and free-molecular methods are used to analyze aerodynamic heating, drag, solar panel deflections, and gas-surface interactions. Transitional-flow calculations predict solar panel heating reductions of up to 40% relative to free-molecular values and drag coefficient reductions of up to 15% at the highest modeled atmospheric density. The study also addresses the spacecraft’s partially deployed solar panel, momentum accommodation differences, and possible CO2 evaporation effects. The simulated evaporation rates did not adequately explain observed axial acceleration perturbations. It appears in the Science & Engineering collection, which groups it with other material that readers may use for comparison and further study.
The item can be approached in several ways. A reader looking for a quick orientation can begin with the free five-page preview, inspect the page structure and use the metadata to judge relevance. Someone undertaking deeper research can work through the complete file, search its indexed text, record useful page references and compare its treatment of Mars Global Surveyor, Aerobraking, Rarefied gas dynamics, Aerothermodynamics, DSMC, Free-molecular flow, Spacecraft aerodynamics, Gas-surface interactions with the related resources linked below.
Rather than reducing the work to a single claim, this page treats it as a source that should be read in context. The title, creator, publication source, licence and format all help explain what kind of evidence it may offer. Readers should distinguish the original author's statements from Doxxly's catalogue description, and should cite the original edition when using the material in academic, professional or published work.
Key topics and reader takeaways
The catalogue connects this document with Mars Global Surveyor, Aerobraking, Rarefied gas dynamics, Aerothermodynamics, DSMC, Free-molecular flow, Spacecraft aerodynamics, Gas-surface interactions. These terms offer practical entry points rather than a substitute for close reading. Start by identifying the definitions, examples, arguments, tables or visual explanations attached to each topic. Then note where the creator draws connections, makes distinctions or moves from background material to a conclusion, recommendation, calculation or narrative development.
A useful reading method is to separate description from interpretation. First record what the item actually presents: names, headings, figures, formulas, quotations or stated propositions. Next consider why those details matter within the whole work. Finally compare them with another source from the same subject area. This process helps turn a long digital file into evidence that can be evaluated rather than merely skimmed.
Table of contents and reading guide
The following is an editorial content guide based on the verified catalogue topics. It is not represented as the original author's formal table of contents. Use it to organise notes while moving through the 8 pages in the player.
Part 1
Mars Global Surveyor
Use this section of the reading guide to identify how Mars Global Surveyor appears in Rarefied Aerothermodynamic Predictions for Mars Global Surveyor, note important terms, and connect the subject to the wider purpose of the work.
Part 2
Aerobraking
Use this section of the reading guide to identify how Aerobraking appears in Rarefied Aerothermodynamic Predictions for Mars Global Surveyor, note important terms, and connect the subject to the wider purpose of the work.
Part 3
Rarefied gas dynamics
Use this section of the reading guide to identify how Rarefied gas dynamics appears in Rarefied Aerothermodynamic Predictions for Mars Global Surveyor, note important terms, and connect the subject to the wider purpose of the work.
Part 4
Aerothermodynamics
Use this section of the reading guide to identify how Aerothermodynamics appears in Rarefied Aerothermodynamic Predictions for Mars Global Surveyor, note important terms, and connect the subject to the wider purpose of the work.
Part 5
DSMC
Use this section of the reading guide to identify how DSMC appears in Rarefied Aerothermodynamic Predictions for Mars Global Surveyor, note important terms, and connect the subject to the wider purpose of the work.
Part 6
Free-molecular flow
Use this section of the reading guide to identify how Free-molecular flow appears in Rarefied Aerothermodynamic Predictions for Mars Global Surveyor, note important terms, and connect the subject to the wider purpose of the work.
Part 7
Spacecraft aerodynamics
Use this section of the reading guide to identify how Spacecraft aerodynamics appears in Rarefied Aerothermodynamic Predictions for Mars Global Surveyor, note important terms, and connect the subject to the wider purpose of the work.
Part 8
Gas-surface interactions
Use this section of the reading guide to identify how Gas-surface interactions appears in Rarefied Aerothermodynamic Predictions for Mars Global Surveyor, note important terms, and connect the subject to the wider purpose of the work.
When a heading in the original differs from this guide, follow the original heading in your citation. Page numbers can also vary between editions. Doxxly's direct page field is useful for navigation, but formal references should include the title, creator, source and edition details available in the file itself.
About Cleo I. Ellwood
Doxxly credits Cleo I. Ellwood as the author or creator of Rarefied Aerothermodynamic Predictions for Mars Global Surveyor. This page does not add an unverified biography, job title or institutional affiliation. The attribution is preserved so readers can distinguish the creator from the hosting library and follow the original record when an external author link is available.
Author context matters because a work reflects a particular purpose, audience and point of view. Before relying on the material, consider what the creator set out to explain, when the source was produced and whether later research or revised guidance should also be consulted. For literature and philosophy, compare translations and editions; for technical material, check whether a newer version has superseded the one shown here.
About the source organisation
The recorded source for this item is cs.odu.edu. Doxxly provides access and discovery tools but does not claim to be the original publisher unless explicitly stated. Source links, creator attribution and the recorded Publicly available file collected for editorial review licence are displayed to help readers assess provenance and permitted use.
Provenance is especially important for reports, standards, presentations and working spreadsheets. Check the original source for amendments, supporting files and current policy. A trustworthy research workflow keeps the source URL with any notes or downloaded copy, verifies important figures against the original, and avoids treating an archived document as automatically current.
Begin with the title and opening pages, then use the guide above to decide whether to read sequentially or move to a particular topic. The Doxxly player provides previous and next navigation, a direct page field, zoom steps, fit-to-width and fit-to-page modes, rotation and fullscreen. These controls are useful when a page contains small type, a wide table, an image, a scanned layout or a dense sequence of notes.
The first five pages are open to every visitor. A plan unlocks the complete item and full-document search. Search is best used for distinctive names, technical terms or short phrases; broad words can produce too many possible contexts. When you find a useful passage, read the surrounding pages so that a sentence, chart or formula is not separated from its explanation.
If downloading is enabled, members can obtain the original PDF file. Keep the original format when formulas, slide sequencing, pagination or layout carries meaning. Respect the Publicly available file collected for editorial review terms displayed on this page, and use the rights-report link if you believe the attribution or availability needs review.
Research questions to consider
As you read Rarefied Aerothermodynamic Predictions for Mars Global Surveyor, ask which audience the creator addresses, what problem or idea organises the work, what evidence is presented, and which assumptions remain unstated. Note whether important terms are defined consistently and whether examples represent a broader pattern or a narrow case. For quantitative material, record units, time periods, formulas and data sources. For interpretive material, separate the creator's language from your own summary.
A second set of questions concerns relevance today. Which parts remain durable, which depend on their historical or institutional setting, and what would need confirmation from a newer source? Following the tags and the Science & Engineering collection can reveal useful comparisons. Agreement between sources can strengthen confidence, while disagreement can point to changing definitions, methods, evidence or priorities.
Finally, decide what you need from the item: background knowledge, a quotation, a worked example, a model, a visual explanation or a starting bibliography. That purpose should guide the depth of reading and the notes you keep. Doxxly helps locate and navigate the source; careful interpretation remains the reader's responsibility.